What wood is used for barge boards?

The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.

What is the best material for a barge board?

If you’re looking for considerably less maintenance, then PVCu or aluminium are very good options. PVCu is available in a sectional size which is robust enough to form the fascia and barge board in its own right, or there are thinner sections that can be used for cladding existing substrate materials.

What are barge boards made of?

Traditionally, barge boards were made from wood. However, modern varieties are mostly built from uPVC. uPVC is low maintenance and offers excellent resistance against UV and weather exposure. It can also be coated in woodgrain foil finishes, giving it the appearance of timber if desired.

What kind of wood do you use for fascia board?

Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.

How do you make a barge board?

From the rafters all trussed ends as necessary. The fixing surface needs to be straight to ensure a fair finish on the fitted fascia or barge. Board fit the first fascia board length insuring.

How thick is a barge board?

Bargeboards are essentially the same as Fascia boards, most houses will use exactly the same boards for both areas. However, they can sometimes be more decorative than Fascias. These are supplied in 5 metre lengths. Unlike fascia boards which have a L shaped profile these boards are flat and approx 18mm thick.

What size is a barge board?

Typically, you will find a 5.5 inch by 3/4 inch barge board which is commonly known as a one by six. The 1×8 or 1×10 may also be used depending on the type of construction. You may see a 2×4 used in some of the lower quality construction.

Why are barge boards called that?

Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) or rake fascia is a board fastened to each projecting gable of a roof to give it strength and protection, and to conceal the otherwise exposed end grain of the horizontal timbers or purlins of the …

How do you replace a barge board?

Quote from video:
The first step is to measure the length of the roof to find the length of the barge boards you need. Next is to remove the old damaged boards these have been attached using roofing nails.

What is a barge board fascia?

Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.

How do I build a shed Bargeboard?

Quote from video:
This is simply three by one timber or in this case it was six by one.

What is the barge on a shed?

Barge Capping : Barges, Barge cap etc are the typically right angled flashings installed at each end wall of a shed where the end wall sheets meet the roof sheeting and a water proof capping is required to seal the shed. They are available in different designs to suit different needs and tastes.

How do you fit soffits and barge boards?

Quote from video:
Every rafter foot now has a hanger securely attached ready for the fascia and soffit fall the maximum distance between hanger positions should be 600 millimeters for white profiles.

How do you attach a PVC fascia board?

Quote from video:
With this assembly with the miter coming. Together using the cortex screws can be a little too much stress on the pieces. And it can pull your miter. Open. So what i like to do is i like to glue.

What can I use for soffit board?

Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.

How much do fascias cost UK?

How Much Do Fascias & Soffits Cost? The average cost of installing fascias and soffits as replacement options for your home is between £1,200-3,000 and could be less with our soffit and fascia cost estimator. However, a lot of factors can come into play that affects the cost.

How long do fascia boards last?

Well installed and maintained wooden fascia can last for up to 20 or 30 years, before they start deteriorating. Although some might need replacing within 5 to 10 years.

Can you put new soffit over old?

If you happen to be working on an older home, most contractors and homeowners find that they will need to install their vinyl soffit over top of old wood. This can definitely be done, but you will need to take several precautions to prevent the wood from rotting beneath this new layer.

How long does soffit and fascia last?

Unfortunately, fascias and soffits don’t last forever. Just like the other parts of your roof, they are constantly being exposed to damaging wind, humidity, sun, rain, and critters. It is a good idea to get in the habit of inspecting your fascias and soffits twice a year.

What is interior soffit?

A soffit is an exterior or interior architectural feature, generally the horizontal, aloft underside of any construction element. Its archetypal form, sometimes incorporating or implying the projection of beams, is the underside of eaves (to connect a retaining wall to projecting edge(s) of the roof).

What material is used for the soffit and fascia?

While soffits and fascia are traditionally constructed from materials like aluminum and wood, many homeowners are now choosing ones made from synthetic and composite materials like UPVC and vinyl because they offer easy maintenance and durability.

Do you need scaffolding to replace fascia?

In some instances, scaffolding will be recommended – such as for a typical 3 bedroom semi-detached house on two floors, replacing soffits and fascia board will require the erection of scaffolding.

How much does it cost to install soffit and fascia?

The labor costs for soffit and fascia installation can vary from contractor to contractor. Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.

Is Black guttering cheaper than white?

Black: Black is a more traditional colour, but it is more expensive than white.

Is scaffolding required for guttering?

Replacing tiles, working on guttering and mending valleys are all examples of jobs for which you may not need scaffolding. Single story flat rooves may also not need scaffolding. A secure ladder and a chute to dispose of any discarded materials to the ground may be sufficient. Always think about your safety first.

Can I erect my own scaffolding?

Scaffolds must be designed, erected, altered and dismantled only by competent people and the work should be carried out under the direction of a competent supervisor. All scaffolding must be erected, dismantled and altered in a safe manner.

What can I use instead of scaffolding?

Access platform

This alternative to scaffolding is similar to access towers in the sense that the platform is rectangular, meaning that you can use the flat long surface to carry out your work. An access platform is particularly great for rooftop work.